Concrete Impregnating Agent 2L - Decormania Adhesive & Accessory – Deep Protection for Porous Surfaces, Rain or Shine
Concrete Impregnating Agent - Decormania Adhesive & Accessory is a water-based silicone sealer developed specifically for gypsum and concrete surfaces that demand both durability and aesthetic enhancement. Designed for use inside and out, it creates a hydrophobic barrier that shields porous materials while slightly intensifying their colour. Whether you're sealing [empty], sandstone, or roof tiles, this impregnation formula keeps your finish clean, rich, and protected from the elements.
Apply by spray for gypsum materials, or by brush/spray for concrete and other surfaces. Use in dry weather and temperatures between +5°C and +25°C. For highly absorbent concrete, a second wet-on-wet coat may be required within 20 minutes. Always test on a discreet area first, as colour enhancement may vary by material. For best results, allow at least 7 days after installation before sealing.
How Concrete Impregnating Agent - Decormania Adhesive & Accessory Makes Surface Care Effortless
- Hydrophobic silicone-based sealant that repels moisture and enhances surface tone
- Ideal for gypsum and concrete tiles, sandstone, roof tiles, and clinker
- Prevents staining, surface wear, and weather-induced fading
- Gypsum: spray only | Concrete: spray or brush application
- Apply second coat (wet-on-wet) on absorbent concrete if needed
- Dries evenly—no visible streaks or residue
- Always test first, as slight darkening of the surface may occur
Concrete Impregnating Agent – Technical Details
- Type: Water-dilutable silicone-based concrete and stone impregnator
- Volume: 2L
- Application: Interior and exterior use
- Coverage: 8–10 m² per container (single coat)
- Surface Prep: Clean, dry, free of dust, grease, and oils
- Application Method: Spray on gypsum; brush or spray on concrete and stone
- Second Coat: Apply wet-on-wet within 20 minutes if surface is highly absorbent
- Application Temperature: +5°C to +25°C
- Storage: Store between +5°C and +30°C in original sealed packaging
- Note: May alter surface tone—perform a patch test before full use
Give your concrete the care it deserves—lasting protection that brings out its best.
